Description
Additional Features
 | 5-axis Milling Ball screw-driven system with 5-axis positioning or simultaneous operation |
 | Intelligent Tool Changer (ITC) Knows which tool to automatically swap out when tools have reached their designated lifespan |
 | Virtual Machine Panel (VPanel) A user-friendly VPanel enables easy production and device monitoring – including auto calibration function |
 | Ionizer Reduce static and dust when working with PMMA |
 | Clean Milling Environment Mill clean with powerfully efficient internal dust collection and an automatic cleaning brush |
 | Air Pressure Air pressure is automatically adjusted based on the CAM material data |
Intelligent Tool Control
A feature of the simplified VPanel operation is an Intelligent Tool Control (ITC) function that instinctively swaps out tools directly from their position when they have reached their user-defined lifespan with a designated “partner tool” without needing to pause production. The ITC has been updated for the DWX-52D to allow for user-defined setup– users can now assign burs in any figuration they want in the Automatic Tool Changer (ATC).
5-Axis Milling
A smooth and steady ball screw-driven system produces exceptional results. The DWX-52D simultaneously rotates and tilts discs for deep undercuts— milling large arch restorations and other full-mouth prosthetics with ease.
User Replaceable Spindle
The DWX-52D features a spindle that can be replaced in a matter of minutes, without needing to call out a technician. No special tools, testing or training is required.
A Clean, Precise and Flexible Milling Solution
Simplified Operation
The DWX-52D replaces the complicated controls associated with CNC milling with an intuitive Virtual Machine Panel (VPanel) that automatically swaps out used burs (ITC function), conducts machine diagnostics, and provides one-touch device calibration.
Automatic Cleaning
Load the included brush tool into the Automatic Tool Changer (ATC) and set-it-up to automatically sweep away zirconia dust and other debris for a cleaner milling surface. The DWX-52D also features an internal auto-start dust collection system to maintain a clean machine, and an ionizer to reduce static when milling PMMA.
Open Architecture
The DWX-52D doesn’t tie users to a specific software or proprietary control source. Users have the freedom to work with their choice of the latest CAD/CAM software, scanners and materials.
*Contact your Roland DG authorized dealer for the open architecture set-up that’s right for you.
Specifications
| Cuttable material | Zirconia, Wax, PMMA, Composite resin, PEEK, Gypsum, Glass fiber reinforced resin, Chrome Cobalt sintered metal | |
| Loadable workpiece shape | External Diameter | 98.5 mm |
| Max Height | 60 mm | |
| Step | 10 mm | |
| Pin Type Diameter | 6 mm | |
| Loadable workpiece weight | Up to 850 g | |
| Number of adapters housed | 6 | |
| Operating speed | XYZ axis: | 6 to 1,800 mm/min. (0.24 to 70.9 in./min.) |
| Spindle motor | Brushless DC Motor | |
| Spindle speed | 6,000 to 30,000 rpm | |
| Rotary axis travel angle | A axis | ±360° |
| B axis | ±30° | |
| Number of burs housed | 15 | |
| Attachable bur | Shank diameter | 4 mm |
| Length | 40-55 mm | |
| Compatible compressed air | 0.05/0.2 MPa (Automatic switch) | |
| Interface | USB | |
| Control command set | RML-1, NC code | |
| Power requirements | AC 100 V to 240 V ±10%, 50/60 Hz, 2.0 A (overvoltage category II, IEC60664-1) | |
| Power consumption | Approximately 200 W | |
| Operating noise | During operation | 70 dB(A) or less (when not cutting) |
| During standby | 45 dB(A) or less | |
| External dimensions | Width | 19.5 in (495 mm) |
| Depth | 26.0 in (660 mm) | |
| Height | 23.6 in (600 mm) | |
| Weight | 147.7 lbs. (67 kg) | |
| Installation environment | Altitude | Up to 6,562 ft. (2,000m) |
| Temperature | 41 to 104 °F 5 to 40°C | |
| Humidity | 35 to 80% (no condensation) | |
| Ambient pollution degree | 2 (as specified by IEC 60664-1) | |
| Short-term temporary overvoltage | 1,440 V | |
| Long-term temporary overvoltage | 490 V | |
| Included items | Power cord, power plug adapter, USB cable, manuals, Roland DG software package CD, detection pin, automatic correction jig, pin-type material adapter, hexagonal driver, spanner, milling bur holders, milling bur positioner, dust collection hoses, dust collection hose adapter, regulator, cleaning tool, option adapter labels, material adapters, material adapter rack | |
| Operating system | Windows® 7/8/8.1/10 (32 or 64 bit) | |
| USB cable | Use the included USB cable | |
Info
 | Keep materials organized and ready for production with an included disk adapter rack |
 | Included pin adapter for holding up to eight pin-type blocks |
 | Carbide, diamond and hybrid milling tools are available on the Roland Store (0.3mm, 0.6mm, 1.0mm, 2.0mm) |
 | Add additional adapters for a quicker set-up and a well-organized workflow |
 | Clear away material waste during milling with optional BOFA DustPro vacuum unit |
 | C-Clamp type adapter expands DWX-52D functionality with a 90-degree milling range— allowing users to mill full arch cases and providing greater overall esthetics |
